Outside Machinist III Part Time On Call (SRS)

Epsilon Systems Solutions • Part-time • Jacksonville, FL, US • 2w ago

Epsilon Systems is seeking a part time, on call Outside Machinist III for the Ship Repair Sector located in Mayport, FL.

Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.

Responsibilities

Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
Strictly adheres to safety, quality standards.
Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
Insures all tools listed on the “Required Tools List” are available for use within two weeks of your employment.
Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
Performs and/or verifies mechanical alignments.
Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
Assists in rigging when necessary.
Other duties as assigned.

Requirements

High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard
5 years’ experience.
Has knowledge of the trade qualifications and performs as a level III Outside Machinist.
Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).
Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.
Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.
Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.
Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.
Assists in rigging evolutions when necessary.
Communicates effectively
Works independently or in a group. Requires no supervision/oversight.
Ability to do basic math, i.e. add, subtract, divide and multiply.
Ability to read, write, speak, and comprehend English.
Ability to obtain and maintain base access to assigned government/military/private installations.
Ability to travel.

Preferred Qualifications

Ability to obtain and maintain National Security Clearance Level Secret.

ADA Notations

Requires walking, reaching, sitting and concentration in the presence of occasional noise.
Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
Able to lift, carry and move objects up to 50 lbs in weight.
Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Able to perceive and distinguish normal range of colors.
May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Related Jobs

Outside Machinist I

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 2w ago

Manufacturing

Epsilon Systems is seeking a full time Outside Machinist I in Mayport, FL. Summary: Under immediate supervision, repairs, modifies, overhauls or installs various types of equipment or systems according to layout plans, b...

2w ago

Apply

Project Engineer Mechanical or Plumbing

MSA Professional Services • Jacksonville, FL, US • 26m ago

Manufacturing Plumber

Overview At MSA, we’re dedicated to improving communities through exceptional engineering, planning, and design. Our teams collaborate across disciplines to deliver innovative solutions that make a real impact. We believ...

26m ago

Apply

Reset Merchandiser

P.L. Marketing • Part-time • Tyler-Jacksonville Area, US • 3d ago

Retail

Job Summary To complete section plan-o-gram work on a scheduled weekly basis in a grocery store environment. Video Job Description https://vimeo.com/819097048?share=copy Essential Job Functions Read and understand plan-o...

3d ago

Apply

Project Manager

Garney • Jacksonville, FL, US • 1w ago

Construction Project Management

GARNEY CONSTRUCTION A Project Manager position in Jacksonville, FL is available at Garney Construction. To be considered for this position you must have previous project management experience in the water and waste-water...

1w ago

Apply

Customer Service Associate

Wawa • Part-time • Store 5333 - Jacksonville, FL 32216 • 2w ago

Retail Cashier

As a Customer Service Associate (CSA) you are the friendly face that puts the ‘Wow’ in Wawa by greeting and serving our customers. As a CSA, you are proud to be part of a beloved brand that is committed to putting people...

2w ago

Apply

Rigger III

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 2w ago

Installation & Maintenance

Epsilon Systems is currently seeking a full time Rigger III in Mayport, FL. Summary: This position includes the rigging of structures and equipment to and from shipboard locations and off-ship landing sites and/or convey...

2w ago

Apply

Rigger Specialist

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 3w ago

Installation & Maintenance

Epsilon Systems is currently seeking a full time Rigger Specialist in Mayport, FL. Summary: This position includes the rigging of structures and equipment to and from shipboard locations and off-ship landing sites and/or...

3w ago

Apply

Customer Service Associate

Wawa • Part-time • Store 5340 - Jacksonville, FL 32205 • 3w ago

Retail Cashier

As a Customer Service Associate (CSA), you are the friendly face that puts the wow in Wawa by greeting and serving our customers. Our CSAs are proud to be part of a beloved brand that is committed to putting people first...

3w ago

Apply

Customer Service Associate

Wawa • Part-time • Store 5393 - Jacksonville, FL 32211 • 3w ago

Retail

3w ago

Apply

Transportation Program Manager

Larson Design Group • Full-time • Jacksonville, FL • $131k - $196k / year • 1m ago

Transportation Project Management

About Us At Larson Design Group (LDG), we’re more than an award-winning Architecture, Engineering, and Consulting firm; we’re a team of passionate professionals united by a bold purpose: creatively shaping our world. Fro...

1m ago

Apply