Quality Inspector - 1st Shift

AirBorn • Full-time • Georgetown, Texas • 3d ago

SUMMARY: Inspects incoming materials and/or finished products for conformance to specifications.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.

Selects inspection samples according to predetermined methods.
Reads and interprets specifications, drawings, tolerances, and other limits.
Verifies specified requirements of samples by using calipers, micrometers, optical comparators, resistance meters, and other equipment as required.
Records inspection results on logs, graphs, and/or discrepancy reports.
Maintains a familiarity with various data collection systems.
Rejects defective parts, and prepares reject tag.
Sets up inspection equipment.
Maintains test and measurement equipment and calibration systems, and evaluates customer returns and internal corrective actions.

KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:

Completion of a High school diploma, general education degree (GED) or vocational or technical degree
Six months to three years of related experience or training; and/or equivalent combination of education and experience.
Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.
Ability to write simple correspondence.
Ability to effectively present information in one-on-one and small group situations.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to understand and carry out instructions furnished in written, oral, or diagram form.
Ability to deal with problems involving several concrete variables in standardized situations.

QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.

Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

[Equal Opportunity Employer - Disability/Vet]

This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Related Jobs

Full-Time Archaeologist

Johnson, Mirmiran & Thompson • Full-time • Round Rock, TX, US • 1d ago

Job Description Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,300 professionals that provides a full range of multi-disciplined engineering, architecture, informatio...

1d ago

Apply

Climbing Arborist Crew Lead | Austin, TX

Davey Tree • Leander, TX, US • 5d ago

Agriculture & Forestry

Additional Locations: none Primary Locations: TX, Austin, 9224 Research Drive, 78758, TX, Leander, 16085 Reagan Blvd, 78641 Requisition ID: 204126 Position Overview Directs crew members an...

5d ago

Apply

Student Internship Trimmer Trainee | N Austin, TX

Davey Tree • Leander, TX, US • 1w ago

Agriculture & Forestry

Additional Locations: N Austin, TX Primary Locations: TX, Leander, 16085 Reagan Blvd, 78641 Requisition ID: 205609 Position Overview Spring - Summer 2025 Arborist Trainee Internship with...

1w ago

Apply

Manufacturing Engineer ($5K Sign-On Bonus)

AirBorn • Full-time • Georgetown, Texas • 1m ago

Manufacturing

SUMMARY: Define, develop, and oversee the implementation of new manufacturing processes primarily for Raytheon connectors and cable assemblies or improvements to existing manufacturing processes, maintaining high le...

1m ago

Apply

Test Engineer

AirBorn • Full-time • Georgetown, Texas • 2m ago

Engineering

AirBorn Inc, a 100% employee-owned manufacturer for military, aerospace and other high -reliability equipment industries. Since 1958, AirBorn believes employees are the company’s most important asset. We, as employee o...

2m ago

Apply

Climbing Arborist | Leander, TX | N Austin

Davey Tree • Leander, TX, US • 2m ago

Agriculture & Forestry

Additional Locations: none Primary Locations: TX, Leander, 16085 Reagan Blvd, 78641 Requisition ID: 203175 Position Overview Trim and remove trees, remove unwanted, diseased or dying limbs...

2m ago

Apply

Custodian in Hutto

ServiceMaster • Full-time • Hutto, TX, US • 3m ago

Cleaning & Sanitation

Benefits Bonus based on performance Free uniforms Training & development 401(k) matching Donation matching For more than 60 years, ServiceMaster Clean has been creating cleaner, healthier, safer work envi...

3m ago

Apply

Senior Mechanical Design Engineer ($5K Sign-on Bonus)

AirBorn • Full-time • Georgetown, Texas • 4m ago

Manufacturing

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate. SUMMARY: Develops and coordinates the design and production of electronic components from i...

4m ago

Apply

Mechanical Design Engineer ($5K Sign-On Bonus)

AirBorn • Full-time • Georgetown, Texas • 4m ago

Manufacturing

4m ago

Apply

Custodian Gerorgetown

ServiceMaster • Full-time • Georgetown, TX, US • 4m ago

Cleaning & Sanitation

Benefits 401(k) matching Bonus based on performance Donation matching Flexible schedule Training & development For more than 60 years, ServiceMaster Clean has been creating cleaner, healthier, safer work...

4m ago

Apply