CNC Machinist & Programmer

Epsilon Systems Solutions • Full-time • San Diego, CA, US • $26 - $27 / hour • 1d ago

Epsilon Systems Solutions, Inc. is seeking a full-time CNC Machinist & Programmer I in San Diego, CA.

Summary

The position will provide maintenance, repair and technical support to the customer. Operate and maintain a variety of inside CNC machines. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) that contain information required to accomplish work.

Duties And Responsibilities

Machines, fabricates, and refurbishes newly designed and replacement shipboard components utilizing templates and technical documentation to include ships' drawings.

Completes machine repairing, manufacturing new, removal, repairs, modifying, and testing of various shipboard components.

Determines speeds and feeds, coolants, and lubricants or abrasives to be used to cut, turn, drill, mill, bore, tap, thread, ream, lap, hone, shape, and grind or finish item.

Supports personnel that are able to machine materials to include: stainless steel, 300/400 series; monel; K-monel; copper; brass; aluminum, 4140, 4130, 6061-T6; nylon; Teflon; and various plastics.

Follows the requirements and procedures set forth in FWPs and CWPs.

Reads, understands, and works to the requirements of applicable ship drawings, blueprints, equipment technical manuals, and other applicable approved technical references.

Uses shop mathematics including trigonometry and geometry and hold tolerances to one ten-thousandths (.0001) of an inch.

Maintains dimensional accuracy by inspection of parts using various precision measuring instruments including: sine plates, comparators, micrometers, calipers, v-blocks, angle plates, indicators, dial height gauges, go/no-go gauges, thread gauges, surface gages and other measuring tools.

Determines which machine tool would be used most effectively, and the proper sequence of operations on each machine.

Makes new job setups on a variety of different types of equipment involving accurate alignment in order to maintain specified overall tolerances.

Sets up and operate conventional machine tools, including: horizontal lathes, vertical turret lathes, horizontal boring machines, radial arm drills, vertical and horizontal milling machines, bench grinders, ID and OD grinders, surface grinders, jig boring machines, hones, and other manual machine tools.

Sets hard jaws and cut soft jaws to hold outside and inside diameters.

Touches off tools using tool eye, and manual touch off using tool, wear, and work offsets.

Uses turning tools, boring bars, insert drills, reamers, inside groovers, outside groovers, part off tools, and threading tools.

Uses tool offsets and work offsets on CNC machining centers and CNC lathes.

Uses Master Cam X10 to program computer numeric control (CNC) machining centers and lathes.

Programs CNC lathes using Fanuc control. Set up and operate 3, 4, and 5-axis CNC milling centers.

Programs and edits programs for CNC machining centers.

Inputs (MDI) machine operations.

Sets up and operates single and multiple spindle CNC lathes.

Required Qualifications

High school diploma or equivalent

Minimum of 2 years of work experience performing CNC machine programming and operations

Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts

Knowledge and difference of grades of inserts and radius of inserts.

Ability To Pass PQS 301 Craftsmen Qualifications

Ability to read schematics and blue prints

Ability to read technical manuals and repair standards

Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings

Ability to obtain and maintain a secret security clearance

Preferred Qualifications

Ability to setup and operate 5 axis spindle CNC lathes

Knowledge of the difference between grades of inserts and radius of inserts

Experience operating water jet cutting machines

Knowledge of OMAX waterjet and Intelli-MAX® software

Pay Range

The pay range for this role is $26.26 -$27.00 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.

ADA Notations

Requires walking, reaching, sitting and concentration in the presence of occasional noise

Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships)

Ability to lift, carry and move objects up to 50 lbs. in weight

Office, warehouse, laboratory, pier side, shipboard

Noise conditions range from very quiet to loud

Ability to wear a face mask while working

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Related Jobs

Opto-Mechanical Engineer III - 076QE

Quartus Engineering • Full-time • San Diego, CA, US • 1w ago

Manufacturing

About Quartus Quartus Engineering Incorporated (www.quartus.com) is a leading provider of engineering services and integrated hardware solutions for a wide range of clients and industries. We employ advanced computer-aid...

1w ago

Apply

Lead Opto-Mechanical Engineer - 077QE

Quartus Engineering • Full-time • San Diego, CA, US • 1w ago

Manufacturing

1w ago

Apply

Environmental Health and Safety (EHS) Manager

Epsilon Systems Solutions • Full-time • National City, CA, US • $89.86k - $121.58k / year • 2w ago

Manufacturing Human Resources (HR)

Epsilon Systems Solutions Inc. has a current opening for a full-time EHS Manager in National City, CA. Summary: Directly reports to the Sr. Manager QA&EHS. Provides all environmental, health and safety compliance ove...

2w ago

Apply

Quality Assurance and Non-Destructive Test Specialist

Epsilon Systems Solutions • Full-time • Imperial Beach, CA, US • $33 - $36 / hour • 2w ago

Manufacturing

Epsilon Systems Solutions, Inc. has an opportunity for a full-time Quality Assurance and Non-Destructive Test Specialist in San Diego, CA. Summary: The Quality Assurance and Non-Destructive Test Specialist will provide Q...

2w ago

Apply

Quality Technician - 074QE

Quartus Engineering • Full-time • San Diego, CA, US • 2w ago

Manufacturing

2w ago

Apply

Mechanical Engineer, Semiconductor - 045QE

Quartus Engineering • Full-time • San Diego, CA, US • 4w ago

Manufacturing

4w ago

Apply

Opto-Mechanical Engineering Manager - 053QE

Quartus Engineering • Full-time • San Diego, CA, US • 2m ago

Manufacturing

2m ago

Apply

Opto-Mechanical Engineer I (New College Grad) - 064QE

Quartus Engineering • Full-time • San Diego, CA, US • $64.39k - $105.71k / year • 3m ago

Manufacturing

3m ago

Apply

Senior Opto-Mechanical Engineer - 065QE

Quartus Engineering • Full-time • San Diego, CA, US • $114.61k - $226.60k / year • 3m ago

Manufacturing

3m ago

Apply

Junior Project Manager

Epsilon Systems Solutions • Full-time • San Diego, CA, US • $80k - $100k / year • 1d ago

Project Management

Epsilon Systems Solutions, Inc. is seeking a full time Junior Project Manager in San Diego, CA. Job Summary: Planning, organizing, staffing, coordinating, directing and controlling of projects under contract, developing...

1d ago

Apply