Shipfitter I (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 5d ago

Epsilon Systems is currently seeking a full-time Shipfitter I for SRS in Mayport, FL.

Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabricates fixtures and jigs.

Responsibilities

Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.
Read and understands Epsilon Systems Mission Readiness Group PPE Policy.
Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.
Lays out material prior to performing machining operations to prevent possible errors.
Fabricates parts to close tolerances ensuring finish requirements of the drawings are achieved.
Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
Ensures all tools listed on the “Required Tools List” are available for use within two weeks of employment at Epsilon.
Qualifies as a Shipfitter in accordance with Epsilon Systems Mission Readiness Group Process Instructions.
Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.
Notifies Foreman of unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
Reads and understands basic terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.
Determines fit-up requirements for a wide range of structural components in accordance with required technical drawings, manuals and instructions.
Installs deck, hull and bulkhead systems IAW required technical drawings, manuals and instructions.
Designs, fabricates and installs complex fixtures, jigs and targets to ensure proper alignment during welding/ brazing procedures. Determine size and material requirements for system modification or installation.
Ensures control and assumes responsibility for Level I and material controls in accordance with Process Instruction.
Frequent travel and overtime are required.
Work outside specific trade skill is required.

Qualifications

High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with Shipfitting practices in a repair department or shipyard. Knowledge and practical skills tests required.
1-3 years’ experience working under a skilled shipfitter.
Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.
Ability to read a ruler/tape measure.
Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.
Prepare structural components for post assembly welding by performing end preparations such as beveling, grinding etc.
Ability to read, write, speak, and comprehend English.
Ability to obtain and maintain base access to assigned government/military/private installations.

Preferred Qualifications

DoD Secret Security Clearance, or the ability to obtain one is desired.

ADA Notations

Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Work conditions vary from indoors to outdoor, very hot to very cold.

Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
Able to lift, carry and move objects up to 50 lbs. in weight.
Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Able to perceive and distinguish normal range of colors.
May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Related Jobs

Part-Time Delivery Driver: Jacksonville, FL

Jasper Engines & Transmissions • 7037 Commonwealth Ave, Jacksonville, FL 32220, USA • 1w ago

Transportation

Part-Time Delivery Driver: Jacksonville, FL Join one of our 50+ branch locations throughout the United States and become a part of the JASPER family. JASPER is the nation’s largest re-manufacturer of engines and transmis...

1w ago

Apply

Part-Time Delivery Driver: Jacksonville, FL

Jasper Holdings, Inc. • 7037 Commonwealth Ave, Jacksonville, FL 32220, USA • 1w ago

Transportation

1w ago

Apply

Shipfitter III (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 1m ago

Transportation

Epsilon Systems is seeking a full time Shipfitter III for the Ship Repair Sector located in Mayport, FL Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabrica...

1m ago

Apply

Transportation Program Manager

Larson Design Group • Full-time • Jacksonville, FL • $131k - $196k / year • 3m ago

Transportation Project Management

About Us At Larson Design Group (LDG), we’re more than an award-winning Architecture, Engineering, and Consulting firm; we’re a team of passionate professionals united by a bold purpose: creatively shaping our world. Fro...

3m ago

Apply

Assistant Project Manager - Plant

Garney • Jacksonville, FL, US • 4d ago

Construction Architecture Project Management

GARNEY An Assistant Project Manager position is available at Garney. To be considered for this position you must have previous progressive construction experience. WHAT YOU WILL BE DOING Process and review shop draw...

4d ago

Apply

Assistant General Manager

Wawa • Full-time • Store 5462 - Jacksonville, FL 32220 • 1w ago

Management

As an Assistant General Manager (AGM) , you’re a hands-on leader who plays a key role in daily operations, team development, and driving results. From overseeing business performance and profitability to leading the hiri...

1w ago

Apply

Customer Service Associate

Wawa • Part-time • Store 5368 - Jacksonville, FL 32256 • 1w ago

Retail Cashier

As a Customer Service Associate (CSA) you are the friendly face that puts the ‘Wow’ in Wawa by greeting and serving our customers. As a CSA, you are proud to be part of a beloved brand that is committed to putting people...

1w ago

Apply

Assistant General Manager

Wawa • Full-time • Store 5470 - Jacksonville, FL 32221 • 1w ago

Management

1w ago

Apply

Project Manager

Garney • Jacksonville, FL, US • 2w ago

Construction Project Management

GARNEY CONSTRUCTION A Project Manager position in Jacksonville, FL is available at Garney Construction. To be considered for this position you must have previous project management experience in the water and waste-water...

2w ago

Apply

Assistant General Manager

Wawa • Full-time • Store 5351 - Jacksonville, FL 32254 • 2w ago

Management

2w ago

Apply