Outside Machinist III (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 1m ago

Epsilon Systems is seeking a full time Outside Machinist III for the Ship Repair Sector located in Mayport, FL.

Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.

Responsibilities

Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
Strictly adheres to safety, quality standards.
Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
Insures all tools listed on the “Required Tools List” are available for use within two weeks of your employment.
Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
Performs and/or verifies mechanical alignments.
Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
Assists in rigging when necessary.
Other duties as assigned.

Requirements

High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard
5 years’ experience.
Has knowledge of the trade qualifications and performs as a level III Outside Machinist.
Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).
Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.
Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.
Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.
Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.
Assists in rigging evolutions when necessary.
Communicates effectively
Works independently or in a group. Requires no supervision/oversight.
Ability to do basic math, i.e. add, subtract, divide and multiply.
Ability to read, write, speak, and comprehend English.
Ability to obtain and maintain base access to assigned government/military/private installations.
Ability to travel.

Preferred Qualifications

Ability to obtain and maintain National Security Clearance Level Secret.

ADA Notations

Requires walking, reaching, sitting and concentration in the presence of occasional noise.
Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
Able to lift, carry and move objects up to 50 lbs in weight.
Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Able to perceive and distinguish normal range of colors.
May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Related Jobs

Quality Control Inspector (QCI) II (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 1m ago

Manufacturing

Epsilon Systems Solutions, Inc. has a job opportunity for a Quality Control Inspector (QCI) II. Summary: Directly reports to QA & EHS Manager at the Jacksonville, FL location. Inspect and monitor work performed on go...

1m ago

Apply

Quality Assurance Specialist II (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 1m ago

Manufacturing

Epsilon Systems Solutions, Inc. has a job opportunity for a Quality Assurance Specialist II. Summary: Directly reports to QA & EHS Manager at the Jacksonville, FL location. Inspect and monitor work performed on gover...

1m ago

Apply

Project Engineer Mechanical

MSA Professional Services • Jacksonville, FL, US • 24m ago

Manufacturing

Overview MSA is seeking a Project Engineer - Mechanical or Plumbing Design to join our Jacksonville team. In this role, you will lead and support the planning, design, and construction of mechanical and plumbing systems...

24m ago

Apply

Assistant Project Manager - Plant

Garney • Jacksonville, FL, US • 4d ago

Construction Architecture Project Management

GARNEY An Assistant Project Manager position is available at Garney. To be considered for this position you must have previous progressive construction experience. WHAT YOU WILL BE DOING Process and review shop draw...

4d ago

Apply

Shipfitter I (SRS)

Epsilon Systems Solutions • Full-time • Jacksonville, FL, US • 5d ago

Transportation

Epsilon Systems is currently seeking a full-time Shipfitter I for SRS in Mayport, FL. Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabricates fixtures and j...

5d ago

Apply

Assistant General Manager

Wawa • Full-time • Store 5462 - Jacksonville, FL 32220 • 1w ago

Management

As an Assistant General Manager (AGM) , you’re a hands-on leader who plays a key role in daily operations, team development, and driving results. From overseeing business performance and profitability to leading the hiri...

1w ago

Apply

Customer Service Associate

Wawa • Part-time • Store 5368 - Jacksonville, FL 32256 • 1w ago

Retail Cashier

As a Customer Service Associate (CSA) you are the friendly face that puts the ‘Wow’ in Wawa by greeting and serving our customers. As a CSA, you are proud to be part of a beloved brand that is committed to putting people...

1w ago

Apply

Part-Time Delivery Driver: Jacksonville, FL

Jasper Engines & Transmissions • 7037 Commonwealth Ave, Jacksonville, FL 32220, USA • 1w ago

Transportation

Part-Time Delivery Driver: Jacksonville, FL Join one of our 50+ branch locations throughout the United States and become a part of the JASPER family. JASPER is the nation’s largest re-manufacturer of engines and transmis...

1w ago

Apply

Part-Time Delivery Driver: Jacksonville, FL

Jasper Holdings, Inc. • 7037 Commonwealth Ave, Jacksonville, FL 32220, USA • 1w ago

Transportation

1w ago

Apply

Assistant General Manager

Wawa • Full-time • Store 5470 - Jacksonville, FL 32221 • 1w ago

Management

1w ago

Apply